Quick Start Guide – How To Use the Zoom H5 as an Audio Interface

Looking for:

– How to use the zoom h5

Click here to ENTER


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

And to keep your levels under control, the H5 offers compression and limiting. The H5 utilizes the same high-quality, low-noise preamps as our flagship H6, ensuring great-sounding recordings in all sonic environments.

The Auto-Record function allow the H5 to automatically start and stop recording at predefined sound levels. This audio safety net helps to protect your recordings. Each input has a dedicated gain control knob. Outs A Line Out with adjustable volume allows you to send audio from the H5 to the input of a camera or other device without the need for an attenuator cable. In addition, there’s a separate headphone output with a dedicated volume control.

You can use both outputs simultaneously to route audio to your DSLR while monitoring with headphones. Record continuously for about 10 hours with just 2 AA batteries or extend your recording time indefinitely with the optional AD AC adapter.

The H5 can record up to six monophonic WAV files or up to three stereo files in any of the following formats:. H5 Handy Recorder Accessory Pack. Protective Case for H5 Handy Recorder. Facebook YouTube Twitter Instagram. Change language Help Center. Close Menu. Change language. Products Handy Recorders. Field Recorders. Podcast Recorders. Video Recorders. Audio Interfaces. Vocal Processors.

Accessibility Statement. Help Center. The H5. Versatile Productivity. Auto-Record The Auto-Record function allow the H5 to automatically start and stop recording at predefined sound levels. Six Interchangeable Mic Capsules. Image Gallery. What’s in the Box. View Gallery.

Related Products. Free Shipping. ZHA-4 Headphone Amplifier. ZDM-1 Dynamic Microphone. WSU-1 Universal Windscreen.

 
 

 

How to use the zoom h5. Quick Start Guide – How To Use the Zoom H5 as an Audio Interface

 

I like to remove the foam piece from the lid and use it to set the H5 on when using it on my desk. Untie the Lavalier cable and connect the Mini XLR end into the power module aligning the rib on the cable with the notch in the power module and then connect the Lavalier Power Module into one of the XLR connections at the bottom of the H5 aligning the silver screw with the notch in the XLR connection. Now clip the Lavalier microphone onto the speaker.

Position it between the first and second button area and ensure that it is not rubbing against clothing. Caution — Cable management — ensure the cable is routed in such a way that it does not to catch on anything or could be stepped on, etc. Next turn on the power to the H5. You will find the power switch on the left side of the H5. Pull the power button to the right, pause briefly and release. Just a note here: When you are ready to turn the H5 off, you use the same process — pull the power button to the right , pause briefly and release.

This is a nice feature to use to lock your setting while recording. Note: The information on how to set up the H5 to use as an audio interface is found on page 72 in the H5 Handy Recorder Operation Manual.

Then press the scroll button in to make that selection. Again press the scroll button in to make that selection. This feature powers the H5 from your computer saving the life of your batteries. The next step is to ensure that your microphone has power. You can check this by looking at the H5 Screen to see if the input level moving as you speak into the microphone.

Note: The information on how to change the phantom power settings for the H5 is found on page 96 in the H5 Handy Recorder Operation Manual. Press the menu button on the right side of the H5 to bring up the menu. Next press the scroll button in to make that selection.

Next open the recording software on your computer such as in our case we will be using QuickTime. See the screen shot below. You have the choice of recording a movie Camera needed , an audio recording you have the Lavalier connected as your source and a screen recording again you have the Lavalier connected as your source if you are wanting to record a voice over while capturing the screen recording.

Click on the down arrow to ensure the H5 is selected as your Microphone source. If not, just click on the H5 to select. Also ensure that Maximum is selected for the quality desired.

If not, just click on the Maximum to select. By adjusting the input knobs as you speak, you can see the corresponding recording level on the screen of the H5 moving accordingly. You would want to run a test recording to get the right sound level to your liking. We want you to find just what you need on our site to strengthen your guitar playing. Be sure to join the mailing list to be the first to know about our latest articles and products.

Connect the USB cable to the H5 and to your computer. This feature powers the H5 from your computer saving the life of your batteries Press the menu button several times to back out of the menu functions being used.

The H5 is ready to work as your Audio Interface. Next, on the Zoom H5, use the input knobs to set the desired sound level. About Guitars and Such is the place to learn guitar. Enjoying the ride, The Guitars and Such Team. Contact Us.

 
 

Leave a Reply

Your email address will not be published. Required fields are marked *